Ether Channel Configuration

Ether Channel Configuration in Cisco Switch:-

If we are configuring two switches for ether channel, it will give high bandwidht with backplane and also redundant links by binding multiple ports between two switches.

Configuration on 1st Switch Ports:

interface TenGigabitEthernet1/0/1
 description ***Connected to FF Switch***
 switchport mode trunk
 channel-group 1 mode on
!
interface TenGigabitEthernet1/0/2
 description ***Connected to 2ndF Switch***
 switchport mode trunk
 channel-group 2 mode on
!
interface TenGigabitEthernet1/0/3
 description ***Connected to GF Switch***
 switchport mode trunk
 channel-group 3 mode on
!
interface TenGigabitEthernet1/0/4
 description ***Connected to Server_Room Switch***
 switchport mode trunk
 channel-group 4 mode on

Configuration on 2nd Switch Ports:
  
interface TenGigabitEthernet2/0/1
 description ***Connected to FF Switch***
 switchport mode trunk
 channel-group 1 mode on
!
interface TenGigabitEthernet2/0/2
 description ***Connected to 2ndF Switch***
 switchport mode trunk
 channel-group 2 mode on
!
interface TenGigabitEthernet2/0/3
 description ***Connected to GF Switch***
 switchport mode trunk
 channel-group 3 mode on

!
interface TenGigabitEthernet2/0/4
 description ***Connected to Server_Room Switch***
 switchport mode trunk
 channel-group 4 mode on